Slurry mixer

Slurry mixer

Hoopman Machines B.V. has over 50 years of experience in the development, production and sales of slurry mixers

The slurry mixers are fitted with special slurry-resistant ‘dredger’ bearings. All types are galvanised. Individual frames, chutes and special designs are available on request.

The PTO driven mixers are supplied with support legs. Excluding Walterscheid PTO. The electric mixers are supplied with a switch box equipped with a switch for two directions of rotation, timer, emergency stop switch and soft starter. Excluding cable.

  • The ESG comes as standard with 10 hp (7.5 kW) electric motor and support leg.
  • The EMM comes as standard with 25 hp (18 kW) electric motor and support leg.

 

Overview Slurry Mixers

Met onze kuilverdeler een sterke combinatie

Adi nescil int maxim reseque velenis eius non repe pos autenih iliqui alignatque doluptur ad moditi blaceped magnimagnim re susam, nation remos quatem faceper.

Tips for the manure pit

The last thing anyone needs during the muck spreading season is difficulty in pumping the slurry out of the slurry pit.

Some tips from Holaras:

  • The flatter the mixer is in the pit, the greater its capacity. This is because the working surface of the wing in the manure increases.
  • It’s important to regularly mix from the outset, to avoid any crust forming on the slurry and keep it homogeneous.
  • Always ventilate well when mixing. Open doors and do not lean over the pump pit.

Holaras manure mixers prevent caking, keep slurry homogeneous, and are available in various models.

Advantages

  • Slurry-resistant dredger bearings
  • Long service life
  • Effective suction
  • Low power, high performance
  • Available in almost any desired length

Compare Slurry Mixers

Standard

Optional

 Not applicable

Type Super-Gigant Mammoet ESG EMM Crane Mixer
 

Configure »

Configure »

Configure »

Configure »

Configure »

Tubelength 400 cm 400 cm 400 cm 400 cm 308 cm
Total Length 431 cm 431 cm 431 cm 431 cm 425 cm
Tubediameter Ø 101.6 mm Ø 101.6 mm Ø 101.6 mm Ø 101.6 mm Ø 115 mm
Lowersection 54 cm 70 cm 54 cm 70 cm Ø 60 cm
3-point attachment part
3-point capsize attachment part
Inverter box complete
Tube length 500 cm instead of 400 cm
Tube length 600 cm instead of 400 cm
Build in wall-frame + slide strips 600 cm
Build in wall-frame + slide strips 600 cm
Build in wall-frame 60x60 cm + slide strips 600 cm
Concrete wall-frame + slide strips 600 cm
Concrete wall-frame + slide strips 600 cm
Mixer frame 60x60 cm instead of 54x54 cm
W2400 PTO shaft + shear bolt
Extended shaft for PTO coupling on ESG/EMM
Augur instead of propellor
Pushing propeller

Backgrounds and events »

Trade fair: Borgeby Fältdagar 2025

On June 25 and 26, we will be present at Borgeby Fältdagar in Sweden together with Evers Agro and Criap. You can find us at stand E143, where we will proudly showcase the power of Dutch-made quality in agricultural machinery.

Hoopman Machines strengthens management team with appointment of Marcel Wolbrink

As of 16 June 2025, Marcel Wolbrink will join the team of Hoopman Machines BV as the company’s new Commercial Director. His appointment marks an important step in ensuring the continuity and driving further growth of the organisation.

A Festive Day for Hoopman Machines

Double Celebration at Hoopman Machines: Birthday Party for Jan Willem Hoopman and Book Presentation by Henk Korten.

Limited accessibility around the holidays

Due to Good Friday, Easter, Ascension Day and Pentecost, our company will be closed for a number of days.

Pricelist 2025

Request the latest price list here. In the price list, you will find a complete overview of our machines...

Limited accessibility around the holidays 2024

Due to the holidays, our company will be closed from the 23rd of December until January 3rd. Do you have an urgent question during this period? Our specialists work with limited staff, but are happy to help you. Would you like to order a part? You can do so by e-mailing parts@holaras.com